CCPA Opt-Out by TermsFeed
 
ADEX Awards Call For Entries 2024-25

Danfoss Reflect

Gold Award
"Danfoss Reflect makes it easy for professionals to install under floor heating in wooden laminate floors in a single day."Under floor heating is no longer limited to stone or tile. Danfoss Reflect can be installed under a wooden laminate floor in just about any location in the home. The natural look and feel of the wood is not affected by the underlying insulating sheets or the rising heat because the heat is given off in a gentle and controlled manner.The difficult task of laying, levelling and setting cement and other materials is now eliminated. Now you simply lay the insulating heat distribution plates on the existing floor, press the heating cable into place, lay the wooden floor directly on top, connect the thermostat, and you can turn on the heat! It cannot get any simpler, faster or cleaner ¦The combination of an insulating subfloor and a heat-conducting surface ensures optimum heat reflection upwards. As a result, a relatively low amount of power will suffice to provide the desired heating comfort and reaction time. The system can be installed on concrete floors or directly on wooden floors without additionalpreparation. Danfoss Reflect provides the necessary insulation against the subfloor.Danfoss Reflect consists of a ½  polystyrene plate covered with a 1/32  aluminium plate with a special profile. Depending on the desired effect, the heating cable is installed in each, every second or every third cable groove.The Danfoss Reflect plates are simply and quickly adjusted to curves and angles by using a jigsaw and ensures a good heat distribution even into the border areas of the room.Danfoss Refelct is available from your local electrical supplier.

Danfoss offers a one stop solution to floor heating, snow melting, pipe tracing, and roof and gutter deicing needs. Floor HeatingThe Danfoss Electric Floor Heating Mat System is an affordable luxury that brings warmth to life. It's a proven technology that's safe, reliable and energy efficient. The unique adhesive system saves up to 70% on installation time! The floor heating cable is also available in loose cables, combining the highest comfort levels with maximum energy efficiency. The floor heating system is available in five different models for different temperature settings and heating applications. Snow MeltingInstalling a Danfoss Snow Melting System provides a permanent solution to the problems caused by cold weather. Improve safety by providing instantaneous relief from snow and ice and increase your bottom line by the cost associated with applying chemicals, owning snow clearing machinery or hiring outside services. Danfoss GX snow melting is available is mats or loose cables. Roof and Gutter DeicingDanfoss RX cables provide the protection needed to prevent ice dams and build up from damaging residential buildings, roofs, and gutters. Danfoss deicing cables constant watt heating cables ensure maximum energy efficiency and are designed for use with metal or asphalt roofing. Durable and high-quality materials provide excellent moisture, corrosion and impact protection. Simply plug the cable directly into the power receptacle.Pipe Freeze ProtectionThe Danfoss PX self regulating parallel circuit heating cables provide the solution the basic freeze protection applications. The self regulating Danfoss PX cables ensure maximum energy efficiency by producing heat only when and where it is needed as it adjusts the power output to the varying conditions along the length of the pipe. TX-SH Thermal Storage HeatingDanfoss Thermal Storage Heating mats and cables are energized to warm a thermal mass below the floor surface. Danfoss TX storage heating mats and cables are the ideal way to take advantage of local on and off peak energy pricing. When the power system is in off-peak times, energy rates are lower. When on-peak times resume, the Danfoss TX system shuts off and the heat stored in the floor gently emanates across the floor surface for hours. TX-FH Floor HeatingDanfoss TX-FH cables are a thick floor heating solution. Thick cables have a larger diameter than the Danfoss LX floor heating cables, allowing them to be lower in cost, higher in heat output, and more durable. They are installed in mud beds below the flooring materials and are most often used in new construction where overall material cost is primary concern.

6711 Mississauga Rd #410
Toronto ON L5N 2W3
Canada
(866) 676-8062
http://www.LX.Danfoss.com
ADEX Awards Call For Entries 2024-25
archinterious.com, adexawards.com & designjournalmag.com is part of Archinterious/ADEX Awards™. All content, graphics are copyright © with publisher. Any commercial use or distribution without the express written consent of publisher is strictly prohibited.
Copyright © 2024 Design Journal / Archinterious /ADEX Awards™,
2456 Sturrock Dr, Henderson, NV, 89044, United States.
All Rights Reserved.